For the past 12 years, we’ve focused on time-lapse cameras designed for maximum battery life. ATLI took a different approach with the E10. It draws continuous power, making an outlet or a robust solar power system the best choice for long-term operation.

That trade-off opens up a fantastic feature set. You can view a live camera feed, adjust settings and download files remotely, whenever you need to.

With our recommended accessories, you can assemble a remotely accessible time-lapse system for less than $500. Below, you'll find our tested configuration and a complete shopping list.

We wish we’d discovered the E10’s potential sooner. Many locations have access to power, whether indoors or at a construction site once work gets underway. If reliable power is available, the E10 deserves a serious look.

We've tested numerous USB cellular Wi-Fi modems and carriers to find a combination that works reliably with the E10. For our US testing, T-Mobile came out on top.

Getting started requires a quick stop at a T-Mobile store to purchase and activate a prepaid SIM card, with plans starting at $10 per month. Insert the SIM into the USB modem, connect it to power, and you have a Wi-Fi connection wherever T-Mobile cellular coverage is available.

The connection isn't high speed, but it doesn't need to be. You can check the live camera feed, change settings, preview footage, and download files remotely to a PC or Mac, or an iOS or Android device.

The peace of mind and the capabilities this simple solution unlocks, are remarkable.

Important: Stick with our tested modem. Finding a USB modem that works properly took a significant amount of testing and troubleshooting. We strongly recommend following our configuration rather than substituting another modem based on a product listing or an untested compatibility claim. A device that appears compatible may still have issues in actual use. We've tested this setup indoors and outdoors, in rural and urban environments. Another bonus: a single modem can provide connectivity for multiple cameras within Wi-Fi range.

Until now, I've relied on battery-powered Brinno and Afidus cameras, followed by the ATLI X10. Then Jonathan from Richmond Time Lapse suggested I check out the E10. I did and it changed how I think about camera power requirements.

Being able to check camera status, control settings, and download footage remotely changes the entire experience. Instead of hoping everything is working between visits, I can check in from home and take action when needed.

Of course, not every location has power. For those installations, I'd still consider an ATLI X10 or GoPro. But where reliable power is available, I'd seriously consider adding an E10 alongside a battery-powered camera. Having two cameras working on the same project gives you more flexibility and variety in your final edit.

Peace of mind matters, too. The E10 can send notifications to the app or your email. See the tabs below for app screenshots and a closer look at its features.

All you need to get started is the camera. But if you want a complete connected system for indoor or outdoor installations, here's the configuration we recommend.

The camera, cellular Wi-Fi modem, and power source fit neatly inside a weather-resistant 9-inch surveillance camera housing. Besides keeping the components together, the housing provides a layer of physical security against theft, whether installed indoors or outdoors.

Assembly is straightforward. The only DIY modifications required for our configuration are enlarging one housing hole with a step drill and applying silicone to seal the plug and extension-cord openings.

All components are readily available on Amazon, and we've provided a shopping list below so you can source the parts yourself.

A note about the quick release: The one pictured is not included in the shopping list while we look for a suitable replacement. A quick release isn't necessary for this installation because the housing's bottom plate is removable.