As an Amazon Associate, this site earns a small commission from qualifying purchases at no extra cost to you.

ATLI X10 Time Lapse Camera

The ATLI X10 takes a different approach to time-lapse. It's affordable, remarkably easy to use, and ready to go right out of the box. Capture still photos, create time-lapse videos, or do both. Set your schedule, choose your interval, and let the camera do its thing. An appreciated feature is the ability to use long exposure settings, giving you more creative control over challenging lighting conditions and moving subjects.

Unlike the E10, the X10 doesn't need a power setup or a collection of accessories to optimize. Its internal battery makes it a self-contained solution, while optional solar panels, power banks, filters and mounting accessories let you adapt it to just about any project.

If you're looking for an capable, affordable, straightforward time-lapse camera that can handle both photos and video without a complicated setup, the X10 deserves a serious look.


Below, we'll walk through power management, our real-world testing, and the accessories worth considering.

Power Management

The ATLI X10 conserves power by sleeping between frames and outside its scheduled recording window. Instead of continuously consuming power like a camera recording video, it wakes up, captures an image, processes it, and quickly returns to an incredibly low-power state.

In the video, approximately three seconds after a capture, power consumption drops to around 0.0164 watts. It stays near that level for almost the entire minute until the next photo.To put that in perspective, a hypothetical smartphone with a 15 Wh battery drawing only 0.0164 watts would run for approximately 38 days.

Paired with a small solar/battery panel, the X10 can keep recording until your memory card is full.

App Screenshots

Recommended Accessories

All you need to get started is the camera, but we've purchased and tested several accessories worth considering.


Surveillance Housings

I wish we'd discovered surveillance housings years ago! They add protection, provide room for additional components, and accept standard 1/4-20 thread clamps. They also offer an effective answer to the question, "How do I prevent camera theft?" Anyone considering touching the camera will have second thoughts

SPYPOINT Solar Panels

The SPYPOINT solar panels with integrated batteries are excellent long-term power solutions. Choose the smaller SPLB-10 if snow isn't an issue in your area. If you're anywhere north of mid-Iowa, we'd recommend the larger SPLB-22.


Slate River Camera Mounts

We've sold Slate River camera mounts for years and endorse their entire product line. They're not available on Amazon, so visit their website directly. Excellent quality, just $10 US shipping. Tell Jim we sent you!

Shopping List  

All you need is the camera, here are some recommended accessories.  

ATLI X10 Camera

10" Housing

Tool Battery Adapters

The pictured Milwaukee
adapter appears to be discontinued. 
See note in the Tool Battery section below.

Battery
Box

A Clamp

Pick the 90mm version

Power Cable

Port Putty

Supplemental Power Options

There are several ways to power the ATLI X10 beyond its internal battery. We've tested the options below and found some excellent solutions for extending runtime or powering installations without convenient access to an outlet.

Power Bank

CUKTECH 15 SE Power Bank

One of our favorite options. The 15 SE offers substantial battery capacity and pass-through (always-on) power, making it an excellent choice for extended installations. If you need longer runtime without adding solar, this is a great option.

Solar Panels

SPYPOINT Solar Panels

The SPYPOINT solar panels with integrated batteries have been exceptionally reliable in years of use. Both can power the X10, and with sufficient sunlight, operation can potentially be sustained indefinitely.

They're rated for operating temperatures from -4°F to 140°F, making them a good option for challenging outdoor conditions. For winter installations, we recommend the larger SPLB-22 to provide additional capacity when sunlight is limited or snow accumulates on the panel.

For extended cold-weather use, we recommend removing the X10's internal battery. Most lithium-ion batteries should not be recharged below freezing, and the camera can operate from external power. If you remove the battery, protect the exposed USB port against moisture. A little removable putty can help seal the opening.

Cordless Tool Batteries

Another excellent option, particularly on construction sites where tool batteries are already part of the daily routine. Milwaukee, DeWalt, and Craftsman offer USB power adapters that can be used to power the X10.

Place the battery and adapter inside a suitable weatherproof enclosure, and you have a convenient portable power source. Depending on battery capacity and camera usage, swapping batteries every week or two may be all that's needed.

Note: We enthusiastically tested the Milwaukee TOP-OFF (2846-20) and DeWalt USB-C Charging Kit (DCB094K). We had hoped to use a solar panel to recharge a tool battery while powering the camera, but neither setup supported that arrangement.

Power Source & Runtimes

Capture Interval
10 hours scheduled daily

10 Seconds
3,600 daily frames

1 minute
600 daily frames

5 minutes
120 daily frames
ATLI X10 internal battery
4,000 mAh / 14.8 Wh
4 days
14 days
24 days 
CUKTECH 15 SE Power Bank
20,000 mAh / 74 Wh
18 days 
65 days
112 days
SPYPOINT SPLB-10 Solar Panel
7,500 mAh / 27.75 Wh (No Sun)
7 days 
25 days
43 days
SPYPOINT SPLB-10 Solar Panel
7,500 mAh / 27.75 Wh (With Sun)
Potentially Unlimited*
Potentially Unlimited*
Potentially Unlimited*
SPYPOINT SPLB-22 Solar Panel
(55.5 Wh) No Sun
14 days
50 days
87 days
SPYPOINT SPLB-22 Solar Panel
15,000 mAh / 55.5 Wh (With Sun)
Potentially Unlimited*
Potentially Unlimited*
Potentially Unlimited*
18V Cordless Tool Battery
2 Ah / 36 Wh*
9 days
33 days
56 days
18V Cordless Tool Battery
4 Ah / 72 Wh*
18 days
65 days
112 days 
18V Cordless Tool Battery
6 Ah / 108 Wh*
27 days
99 days
168 days
USB-C Wall Adapter
Potentially Unlimited**
Potentially Unlimited**
Potentially Unlimited**

  • We take battery testing and runtime estimates seriously. Our estimates are based on real-world testing, not ideal conditions. We deduct 30% from nominal battery capacity to account for temperature, actual capacity, conversion losses, and other real-world variables. Your results may vary.

    Solar runtime depends on sunlight, panel orientation, season, and daily power consumption. With sufficient solar charging, operation can potentially be sustained indefinitely.

    Please consider, checking your camera periodically rather than waiting until the estimated end of its battery life. Cameras get knocked over, turned around, painted over, and occasionally investigated by curious animals. We've heard plenty of unbelievable stories. A quick inspection can save an entire project.

Josh's Take...

ATLI has a strong camera lineup, and the X10 is an excellent choice for creators who want a capable, easy-to-use time-lapse camera without a complicated setup. Connecting through Bluetooth and Wi-Fi is effortless, and the app offers a nice balance of manual and automatic controls. It's a camera you can get up and running without spending hours figuring things out.

A feature I particularly appreciate is the 52mm filter thread. You can add an ND filter for creative motion blur, a polarizer to manage reflections, or simply leave a clear UV filter in place to protect the lens. If a filter gets scratched or damaged, replacing it is inexpensive and easy. One small tip: there's an O-ring seated in a groove beneath the lens threads. Be careful not to lose it when changing filters!


I would like the lens to be wider. The X10's field of view is roughly comparable to a 28mm lens on a full-frame camera. That's plenty wide for a kitchen remodel or most outdoor projects, but I found it a little limiting in tighter spaces.


You'll need access to an email address the first time you launch the app. Plan ahead if you're installing the camera somewhere without internet or convenient access to email.

There's a small app quirk worth knowing. To configure the recording schedule and interval, you'll first need to tap the Record button. It's a little counterintuitive, but once you know where to look, it's easy.

I wish ATLI included a second battery or made spare batteries readily available. Fortunately, using a quick-release clamp or mount makes it easy to bring the camera inside for charging and return it to precisely the same position.

Here in Minnesota, winter brings another consideration. Lithium batteries generally shouldn't be charged outdoors when temperatures are below freezing. I'd plan on bringing the camera inside on Friday for a weekend recharge. For extended installations in extreme cold, you can also remove the battery and use an external power source, such as a cordless tool battery or solar panel detailed above.


If you have convenient access to power, I'd give the ATLI E10 serious consideration. But if you need a self-contained camera for a location without readily available power, the X10 is an excellent choice. Its simplicity, built-in battery, and flexible mounting options make it a very capable time-lapse camera.

ATLI Resources

X10 Product Page
Help & Instructional Topics
Set-up (it's easy)!