Afidus Long Term Time Lapse Cameras

Over the years, we have built extensive clamp collection and tried everything. This is one of the best! The main bracket is solid aluminum. There are four ¼”x20 mounting points which allow a wide range of camera angles. The removable ball head can be positioned on the end of the screw, the angled portion of the frame and both flat sections. As far as clamps go this one is very sturdy and versatile.

A very unique feature is the dial screw on the frame of the clamp. This allows you to mount a camera at any horizontal angle, if you decide you don’t want to use the ball head, which would give you more rigid support in various situations.

The clamp attaches to round or flat objects up to 2 ⅜” diamater. 

2/22/21 INVENTORY NOTICE: We have a low supply of MagMonstrs and we will update this notice if there will be a shipping delay.

We are going to start this description off with a warning. This magnet has blood blister inducing strength with over 110 pounds of force. Keep your fingers out of the way when you attach it to solid steel. Once attached the magnet won’t move. We recommend painters tape to protect finished surfaces, otherwise you do risk scratching during removal.

Cars, implements, beams, ductwork, this will stick to to any magnetic surface. With thinner metal there is less holding power, but it can still be a great solution. We use ours on steel siding with painters tape. It’s a great option for suspended ceilings and we often mount our cameras upside down.

Created by our good friend Michael Lohr, the magnet sleeve is 3D printed and this is a very functional solution for many steel mounting applications.

Base diameter: 2”
Height: 2.5”

The ball head is secured with Loctite which can be removed with a little force.